 |
GT1-203
General
Taiwan
tapping
1
in 2010
Auto tapping machine
| Main axle stroke | Max 45mm | |||||
| Swing mm | 330 | |||||
| Spiral tooth diameter mm | M2 ~ M8 (45# steel) | |||||
| Vertical motion of the forehead is apart from mm | 260 | |||||
| The main axial-tab terminal and Taiwan are away from mm | 350 | |||||
| Work table size mm | 225 * 230 | |||||
| Foundation area mm | 415 * 300 | |||||
| External dimensions (long * wide * high) mm | 385×159×420 | |||||
| Motor | 3 4P 750W (1HP) | |||||
| Main axle rotation number | 50HZ | 1340, 760, 420 | ||||
| 60HZ | 1600, 900, 500 | |||||
| Conforms to this aircraft to employ according to ability with it Gives the pitch automatedly | Each inch tooth number | 64, 56, 48, 44, 40, 32, 28, 24, 20, 18, 16 | ||||
| mm | 0.2, 0.25, 0.3, 0.35, 0.4, 0.45, 0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 1.0, 1.25, (11.5) | |||||
| Multiple spindle ceiling capacity (m/m standard pitch) | M3×10 axis M4×5 axis M5×2 axis | |||||
| Weight | Approximately 97kg | |||||
| Main axle stroke | Max 45mm | |||||
| Swing mm | 330 | |||||
| Spiral tooth diameter mm | M2 ~ M8 (45# steel) | |||||
| Vertical motion of the forehead is apart from mm | 260 | |||||
| The main axial-tab terminal and Taiwan are away from mm | 350 | |||||
| Work table size mm | 225 * 230 | |||||
| Foundation area mm | 415 * 300 | |||||
| External dimensions (long * wide * high) mm | 385×159×420 | |||||
| Motor | 3 4P 750W (1HP) | |||||
| Main axle rotation number | 50HZ | 1340, 760, 420 | ||||
| 60HZ | 1600, 900, 500 | |||||
| Conforms to this aircraft to employ according to ability with it Gives the pitch automatedly | Each inch tooth number | 64, 56, 48, 44, 40, 32, 28, 24, 20, 18, 16 | ||||
| mm | 0.2, 0.25, 0.3, 0.35, 0.4, 0.45, 0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 1.0, 1.25, (11.5) | |||||
| Multiple spindle ceiling capacity (m/m standard pitch) | M3×10 axis M4×5 axis M5×2 axis | |||||
| Weight | Approximately 97kg | |||||
